How to use this calculator
Estimate aggregate volume and mass. Enter length (feet), width (feet), depth (inches), bulk density (lb / cubic foot). The result updates when you change an input. To compare two sets of inputs, save scenario A, then enter the second set; the result panel shows the difference.
Formula and limits
Volume ft³ = length × width × depth/12. US short tons = volume × bulk density/2000. Enter supplier density; the default is a sample.
Worked example
The following example uses the calculator’s starting values. It is an illustration of the method, not a recommended target.
| Input | Example value |
|---|---|
| Length (feet) | 20 |
| Width (feet) | 10 |
| Depth (inches) | 3 |
| Bulk density (lb / cubic foot) | 100 |
Cubic yards: 1.852
Estimated US short tons: 2.5
Interpreting your result
Confirm actual dimensions, supplier specifications, and site conditions. Quantity estimates do not establish structural adequacy or compliance with building codes. Waste allowances are user assumptions.
Comparing alternatives
Save the first result as scenario A, then change one input. The comparison shows the numeric difference; it does not label either result as better. Choose inputs that describe realistic alternatives. Values shown on screen are rounded, so calculations from rounded intermediate results may differ slightly.